Bob Smith Industries INSTA-CURE+ POCKET Gap-FIlling CA w/Pin in Cap (4oz)

This is a 4 ounce bottle of Bob Smith Industries INSTA-CURE+ Gap Filling Pocket CA Glue with a Pin in Cap Lid. INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.

The Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box.

This product was added to our catalog on October 15, 2021